1080P Full HD Infrared Hunting Camera Image Recycle and 36PCS IR LED

1080P Full HD Infrared Hunting Camera Image Recycle and 36PCS IR LED

INTRODUCTION

The ACUMAN Cam is a digital scouting camera which is designed for activity and is resistant against water

and snow. It is equipped with built-in infrared LEDs, so that it can be triggered by any movement in a location,

then take high quality pictures or video clips.

INSTALLING THE BATTERIES and SD CARD

1. Loading Batteries

We recommends using 8 AA batteries or 6V external battery for power supply. Make sure you install

the batteries with right polarity.

Inserting the SD card

The ACUMAN Cam has 32MB internal memory, which can hold about 18 photos. This is handy for testing and

getting familiar with the camera. But you will no doubt want to take more photos, an SD card is recommended.

Three Basic Operational Modes

· OFF Mode: Power OFF mode.

· ON Mode: Active Passive Infrared Mode.

· SETUP Mode: SETUP/TEST Mode,you can set up camera or playback the photos or videos clips.

1. Changing Parameter Settings in SETUP Mode
2. First switch to the SETUP Mode.
3. Press MENU button.
4. Press RIGHT or LEFT key scrolls to the next or previous parameter.
5. Press UP or DOWN key to select setting for the currently parameter.
6. Press OK to save the new setting.
7. Then switch to ON Mode to take photos or videos.

The SETUP Parameters and Settings List/Descriptions

MOUNTING AND POSITIONING the CAM

Mounting

There are two ways to mount the Cam.

1. Using the adjustable web belt:Push one end of the belt through the two brackets on the back of

the Cam. Thread one plastic buckle part onto each end of the belt. Fasten the belt around

the tree trunk by clicking the buckle ends together.

1. Using the tripod socket: The camera is equipped with a socket at the bottom end to enable mounting

on a tripod or other mounting accessories with a standard 1/4-20 thread.

Sensing angle and distance test

This test is recommended to check the sensing angle and monitoring distance of the Cam. To perform the test:

1. Switch the Cam to the SETUP mode.

2. Make movements in front of the camera at several positions within the area where you expect the

game or subjects to be. Try different distances and angles from the camera.

3. If the motion indicator LED light blinks, it indicates that position can be sensed. If it does not blink, that

position is outside of the sensing area.

The results of your testing will help you find the best placement when mounting and aiming the Cam.The

height away from the ground should vary with the animal size appropriately. In general, 3 to 6 feet is preferred.

Switching on the camera

Once you switch to the ON mode, the motion indicator LED (red) will blink for about 10 seconds. This gives you

time to close and lock the front cover of the Cam and then walk away. After it stops blinking, the PIR is

active, and any motion that is detected by it will trigger the capture of photos or videos as programmed.

VIEW /DELETING IMAGE OR VIDEO ON THE CAMERA LCD SCREEN

There are three ways to review pictures or videos captures

1. to use the camera LCD Screen
2. To use a computer(or a SD card viewer with a USB port)

Use the camera LCD screen to View/Delete Image or Video

1.Put the power switch in SETUP mode (switch to OFF first).

2.Push the OK (Replay) key to enter image review mode.

• View Image or Video

3.Use the UP/DOWN keys to scroll through your photos or videos. Press the

RIGHT (Shot) key to review a video.Press OK to return

• Deleting Image or Video

4.Push MENU to enter the Delete mode. You will see the first ″Delete″ screen, press the OK. Highlight the

“Delete Current” or “Delete All” option, then press OK.

Keepway  Industrial ( ASIA ) CO.,LTD set up in 2003, is a coalition of independent development of hardware and software, industrial design, mold stamping, SMD assembly together, focusing on sales of digital video products and consumer electronics. The most experienced and technological innovation capability of enterprises, we mainly undertake hunting cameras, bird-watching cameras, garden cameras, sports Bluetooth headset, night vision, traps and other products of the hardware and software development, production and after-sales service.

Since its inception, the enterprise has been in a rapid and healthy development track, and has set up Hong Kong office as a market development and sales operations center and Shen Zhen Office as a research and development production center. We have more than 6,000 square meters of manufacturing plants and more than 1,000 square meters of research and development management center.

After more than 16 years of development, all have achieved good results. The formation of a unity and pragmatic, pioneering and innovative R&D and marketing teams makes our products exported to more than 20 countries in Europe and the United States. Especially in product software development, wireless technology, image algorithms, lens design, night vision technology, we have a major breakthrough. In the professional technical knowledge and advanced innovative ideas, we have successfully developed a variety of high-end consumer digital products. And through continuous innovation, company access to dozens of patents, in 2014 successfully achieved a national high-tech enterprises eligible.

Enterprises will be adhering to the "integrity, quality, win-win" principle, and establish long-term good partnership with customers around the world, joining hands in creating a better future.

Our advantages:
1, professional, focused, more selective.
2, a leading research and development team, guaranteed quality, good service.
3, internal process reaction speed is fast, staff cohesion is strong.

We have 21 years of OEM/ODM expertise and receive OEM/ODM order,Welcome!