
1. Working principle
Raw material is fed into machine from input port, at the same time,
vibra motor on the two sides of fluid bed will cause vibration with
regular frequency, make the material move forward continuously in
horizontal direction. The heated air pass through fluid bed, and
exchange heat with material, moisture will exhaust with air through
cyclone duster separator, at last the dried material will be
discharged by output port.
2. Main features
1) With high fluided level, material heated uniformly, heat
exchange adequately, save 30% energy compared with normal dryer. No
dead angle and phenomenon of broken out.
2) Drive by vibra motor, stable in operation, convenient in
maintenance, with low noise, cause a long working life.
3) Good in adjustable and wide in suitability. The stay time for
material, thickness of material layer, drying temperature all can
adjust.
4) With fully sealing structure, prevent the cross pollution
between raw material and air, ensure a clean operation environment.
5) With cushion blocking, reduce the vibrationforece to ensure a
steady condition.
◆ Adopt vibration motor, it is smooth in running and convenient in
maintenance. The noise is low and the service life is long.
The state of fluidization is uniform and no dead gaps or broken
phenomenon so to even dry, cool product.
It is good in adjustment and wide in the field of application. The
thickness of raw material and the speed of raw material to be moved
inside the machine and the change of vibration range can be
steeples. The damage the surface of raw material is small. So it
can be used for raw materials that are easily to be broken. If the
granule is not normal, the effect of process can not be effected.
The structure is fully seal, it is effective to prevent from cross
pollution of raw materials and the working environment is clean.
The mechanical and heat are high and its effective of energy
saving, compared to ordinal dryer, 30-60% of energy is saved.
The moist powder layer is vibrated on an air distributor plate. The
effect of the vibration combined with the upward and forward
directed flow of drying air through the perforated plate create
ideal processing conditions and powder transport. Thanks to the
vibration, it is possible to operate with fluidized powder layers
of less than 200 mm. This gives a narrow and swift controlled
residence time whilst avoiding attrition.
Application :
It is applicable for drying, cooling of powder or granule state
materials, such as citric acid, monosodium glutamate, borax,
ammonium sulphur, compound fertilizer, piece of radish, bean, lees,
seed, mine reside and sugar, in chemical, pharmaceutical,
foodstuff, grain, mine and so on industries.
|
Changzhou Yibu Drying Equipment Co., Ltd